Product Code: FP-21T
RM0.00

FP-21T

Highly Expandable & Precision Oriented

Machine Weight Approx. 42 (93 lbs)
Dimension (W x D x H (mm)) 620 x 505 x 420 (24" x 20" x 17")

FP-21T is designed for "Processing Accuracy". With various options and versatile software functions, FP-21T is suitable not only for typical PCB prototyping but also for processing thin materials, various hard and soft materials, 2.5 Dimensional work, additional work and other works.
 

Specification

Working area 350 x 250 mm
Maximum thickness of the substrate board 30 mm

Is it so special to be able to use 0.1mm RF milling bits?
Yes, indeed. To ensure desirable RF characteristics, it is necessary to use special RF milling bits to cut RF boards. This type of tools have cylindrical tip as shown in the picture shown below. As you can, 0.1mm RF milling tool has very thin cylindrical tip, and is very flrangible compared to a standard milling bit.

          
 

For typical board making, milling bits with pointed conical tip ("typical bit" shown below) are commonly used. This type of cutter is useful for making standard boards quickly in quantity because it is thick and strong. However, it is not desirable to cut 0.1mm patterns for RF boards with conical tipped bits because the channel cross section becomes trapezoidal.

In order to use an 0.1mm RF milling bit, the machine has to minimize the vibration of its mechanism and the spindle motor and runout.

In the words... If a prototyping machine is capable of using 0.1mm RF milling bits, that machine must be high performance.

FP-21T is designed for highly right machine construction and has a high performance spindle motor with very low runout (within 20µm). Furthermore, this motor uses ceramic bearings for longer service life.

Web Video

 

FP-21T model 60
We recommended FP-21T model 60 for those who are interested in processing high load material in quantity or for long hours. Thanks to its spindle motor construction, model 60 is better suited for processing heavy load materials compared to model 40/U.

You can process many materials besides copper substrate board
FP-21T is compatible with the various types of processing besides the normal substrate board. The Z axis stroke is large enough and numerical controllable, so it is suitable for the surface processing of the thick material. Additionally, the air pressure model (FP-21T HP) can process the material in non-contact way, you can process the soft materials without scratching the surface.

 

Application example of FP-21T user

  • Besides the copper substrate board, plastic resin, aluminum, free-machining ceramic
  • Surface processing of the thick material
  • Supplementary processing
  • For routing processing
  • Large size antennae board processing (custom-made)

 

Option makes it easier to use our system

Fiducial positioning camera
Zoom the surface board at 30 times magnification, and you can align the positioning easily and accurately. It is also effective for the supplemental processing of the finished board.

Vacuum table
The porous plastic resin aspirate the substrate board evenly. This equipment can fix the thin material or film without misalignment or warping.

Non-Contact Milling Head
As the board is pressured by air pressure, it leaves no undersirable traces on the board surface. Suitable for milling the soft substrate board such as teflon circuit board.(By attaching the non-contact milling head to the FP-21T, "HP" will added to the model name; FP-21THP. )

 

Non-Contact Board Making & Contact Board Making
When making boards with fine patterns, we usually adopt the incremental milling method in which the material board is held down and the tool tip is made to stick out accurately from the very point where the board is being held down. For holding down the material boards, there are two methods called the contact method and the non-contact method.

 

Contact Board Making System
This system leaves the thin trace of pivot touch on the surface of copper foil. (But this pivot does not leave any scratch.)

Non-Contact Board Making System
As the jet of air pushes down the board without touching, this system leaves no trace on the copper foil. Therefore, this system is suitable for the processing of thin or soft board materials. However, additionally you have to have an air compressor.

 

Specifications
Minimum Pattern Width (mm) 0.1 (4 mil)
Minimum Milling Width (mm) 0.1 (4 mil)
Working Area (X/Y/Z) (mm) 350 x 250 x 25 (14" x 10" x 1")
Table Size (mm) 460 x 450 (18" x 18")
Control Axis X, Y, Z
Control Motor 5 phase stepper motor
Resolution (μm) 4 (0.16 mil)
Maximum Travel Speed (mm/sec.) 80 (3.15")
Spindle Speed Min-1 (rpm) 5000 - 40000 (model 40), 5000 - 60000 (model 60), 5000 - 100000 (model 100)
Spindle Motor HF Spindle
Drilling (mm) 0.2 - 3.175 (8 - 125 mil)
Maximum Drilling Cycle (cycles/min) 80
Maximum Thickness of Processed Material (mm) 30 (1.18")
Tool Change Manual / Single step tool change
Milling Method : Absolute Manual switching
Milling Method : Incremental Yes
Compressed Air (Mpa) 0.5 (required for HP type)
Power Consumption 100 - 240V, 50-60Hz, 250VA
Machine Dimensions W x D x H (mm) 620 x 505 x 420 (24" x 20" x 17")
Machine Weight (kg) Approx. 42 (93 lbs)
Interface One USB or one RS-232C port (Additional USB required with optional fiducial camera)
Standard Equipment Software: EASY CAD, Conversion + CAM
Options and Accessories Fiducial positioning camera 30x, Vacuum table (VT-ABS), Dust proof, Acoustic cabinet, Tool protrusion equipment, Ring-setter/ Precision ring-setter (manual), Drilling ring, Connecting Cable (USB), Software: Vacuum cleaner
Starter Kit (Option) Connecting Cable (RS232C / USB), Magnifying Glass 10x, Extension Hose for Vacuum Cleaner, Tools : End Mills; Drill Bit, Router Bit