Product Code: Auto Lab W
RM0.00

Auto Lab W

Low-cost, Auto Tool Change machine with Wide Working Area Coming Soon!

Machine Weight Approx. 41 (90 lbs)
Dimension (W x D x H (mm)) 635 x 643 x 430 (25" x 25.3" x 17")

Auto Lab W tool automatically changes up to 10 tool bits (20 tool bits optional) and it installs the spindle motor made in Japan, finely tuned and prevent run-out to the minimum. Tool change employs the electrical function without using the air compressor.
 

Standard camera monitoring system
Magnify the surface of the board and display on a monitor. You can easily adjust the right position while viewing display. (Maximum useful magnification depends on the size of the screen)

 

Specifications
Minimum Pattern Width (mm) 0.1 (4 mil)
Minimum Milling Width (mm) 0.1 (4 mil)
Working Area (X/Y/Z) (mm) 400 x 365 x 45 (15.7" x 14.3" x 1.8")
Table Size (mm) 490 x 490 (19.3" x 19.3)
Control Axis X, Y, Z
Control Motor Stepper Motor
Resolution (μm) 0.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) 80 (3.15")
Spindle Speed Min-1 (rpm) 5000 - 62000 (model 60), 5000 - 100000 (model 100)
Spindle Motor DC Brushless Spindle
Drilling (mm) 0.2 - 3.175 (8 - 125 mil)
Maximum Drilling Cycle (cycles/min) 55
Maximum Thickness of Processed Material (mm) 30 (1.18")
Tool Change Automatic / 10 (20 tools by option)
Milling Method : Absolute No
Milling Method : Incremental Yes
Compressed Air (Mpa) ---
Power Consumption 100 - 240 V, 50-60 Hz, 200VA
Machine Dimensions W x D x H (mm) 635 x 643 x 430 (25" x 25.3" x 17")
Machine Weight (kg) Approx. 41 (90 lbs)
Interface One USB or one RS-232C port
Standard Equipment Fiducial positioning camera x30 (USB), 10 Pieces Auto Tool Change Software: EASY CAD, Conversion & CAM
Options and Accessories Tool Change 20, Ring-setter / Precision ring-setter (manual), Drilling ring, Microscope 100x, Software: Vacuum cleaner
Starter Kit (Option) Connecting Cable (RS232C / USB), Magnifying Glass 10x, Extension Hose for Vacuum Cleaner, Tools : End Mills; Drill Bit, Router Bit