Product Code: Auto Lab
RM0.00

Auto Lab

Equipped Auto-Tool-Change and providing the superior cost performance

Machine Weight Approx. 34 (76 lbs)
With cabinet: Approx. 44 (99 lbs)
Dimension (W x D x H (mm)) 435 x 575 x 430 (17.2" x 23" x 17")
With cabinet: 500 x 580 x 450 (19.7" x 23" x 18")

Auto Lab replaces Eleven Auto. This model employs Auto-Tool-Change mechanism and achieves a low price, while its specification exceeds Eleven Auto. Up to 10 tools are available for automatic tool change. The standard spindle motor is made in Japan with high quality and less runout. Tool change employs the electrical function without using the air compressor. (Note: Spindle motor installed on Auto Lab 100 is not made in Japan. Air compressor required.)
 

Cabinet (requires assembly) is available as an optional item
Well designed and easy to perform maintenance.

          
 

Standard camera monitoring system
Magnify the surface of the board and display on a monitor. You can easily adjust the right position while viewing display. (Maximum useful magnification depends on the size of the screen)

Web Video
Demonstration video featuring our latest Lab series auto tool change prototyping machine. It includes double-sided board fabrication, camera alignment function and overlay function.

Optional equipments make it even easier to process
Vacuum table The vacuum table option employs the porous resin which holds tightly in the whole area of the surface. This stabilizes the substrate tightly without causing twisting or warpage.

 

Specifications
Minimum Pattern Width (mm) 0.1 (4 mil)
Minimum Milling Width (mm) 0.1 (4 mil)
Working Area (X/Y/Z) (mm) 229 x 300 x 45 (9.0" x 11.8" x 1.8")
Table Size (mm) 296 x 370 (11.6" x 14.5")
Control Axis X, Y, Z
Control Motor Stepper Motor
Resolution (μm) 0.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) 55 (2.17")
Spindle Speed Min-1 (rpm) 5000 - 62000
Spindle Motor DC Brushless Spindle
Drilling (mm) 0.2 - 3.175 (8 - 125 mil)
Maximum Drilling Cycle (cycles/min) 55
Maximum Thickness of Processed Material (mm) 30 (1.18")
Tool Change Automatic / 10
Milling Method : Absolute No
Milling Method : Incremental Yes
Compressed Air (Mpa) ---
Power Consumption 100 - 240 V, 50-60 Hz, 200VA
Machine Dimensions W x D x H (mm) 435 x 575 x 430 (17.2" x 23" x 17") With cabinet: 500 x 580 x 450 (19.7" x 23" x 18")
Machine Weight (kg) Approx. 34 (76 lbs) With cabinet: Approx. 44 (99 lbs)
Interface One USB or one RS-232C port
Standard Equipment Fiducial positioning camera 30x (USB), 10 Pieces Auto Tool Change Software: EASY CAD, Conversion & CAM
Options and Accessories Cabinet (requires assembly), Vacuum table, Ring-setter / Precision ring-setter (manual), Drilling ring, Microscope 100x , Software: Vacuum cleaner
Starter Kit (Option) Connecting Cable (RS232C / USB), Magnifying Glass 10x, Extension Hose for Vacuum Cleaner, Tools : End Mills; Drill Bit, Router Bit