Accelerometers

Description:

These industrial ICP accelerometers have ceramic sensing element of annular shear design in a top-exit, hemretically sealed, stainless steel housing. All of our accelerometers are case isolated and provide excellent resolution and durability in noisy industrial environments.

Enquiry

  • Accelerometers

    Low Cost Single Axis Accelerometer (SQI608A11-3F)
      •    Low-cost, general purpose, industrial ceramic shear         ICP accel, 100mV/g, 0.5 to 10k Hz, top exit, 10-ft                   integral cable
    •   •    Sensitivity: ( ±15%) 100 mV/g (10.2 mV/(m/s²))
    •   •    Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to           10000 Hz)
    •   •    Measurement Range: ±50 g (±490 m/s²)
    •   •    Mounting: Stud
    •   •    Electrical Connector: 10′ long cable to BNC                           connector
    •   •    Also comes in 4 pack and 8 pack
    •   •    Come with 3′ long cable with transducer to BNC connector and 7′ BNC-BNC extension cable

    • Low Cost Single Axis Accelerometer (SQI608A11-3F)
        •    Low-cost, general purpose, industrial ceramic shear         ICP accel, 100mV/g, 0.5 to 10k Hz, top exit, 10-ft                   integral cable
      •   •    Sensitivity: ( ±15%) 100 mV/g (10.2 mV/(m/s²))
      •   •    Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to           10000 Hz)
      •   •    Measurement Range: ±50 g (±490 m/s²)
      •   •    Mounting: Stud
      •   •    Electrical Connector: 10′ long cable to BNC                           connector
      •   •    Also comes in 4 pack and 8 pack
      •   •    Come with 10′ long cable with BNC connector
      •  
      Tri-Axis Accelerometer (SQI604B31)
        •    Triaxial ring-style, industrial, ceramic shear ICP                   accel, 100 mV/g, 0.5 to 5k Hz, side exit, 4-pin conn.
      •   •    Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
      •   •    Frequency Range: (±3dB) 30 to 300000 cpm (0.5 to           5000 Hz)
      •   •    Measurement Range: ±50 g (±490 m/s²)
      •   •    Mounting: Through Hole.
      •   •    Electrical Connector: 10′ long cable to BNC                           connector
      •   •    Electrical Connector: 4-Pin MIL-C-26482 and 10′                 long cable to three BNC connectors
      Accelerometer Mounting Kit (M-AMK)

        •    Attach your accelerometer (¼ – 28 thread) to your             machinery.

        •    The kit consists of 6 disks, 2 magnets and adhesives.

      Triaxial accelerometer mounting block (M-TAMB)
        •    Convenient, inexpensive, triaxial measurements. It           provides a means to secure three transducers (¼ –           28 thread) in an X-Y-Z configuration in a compact             arrangement.
      •   •    The kit consists of one triaxial mounting block